Posts Tagged "Leman Russ"

My original plan had been to make more repairs and modifications to the Macharius Salvation sub-project. However I had some Forgeworld stuff and a surprise in the post today which demanded a small post.

Firstly here is a picture of the forgeworld haul …

Two Ryza turrets and a Leman Russ Mars Alpha pattern hull including trench rails.

I have long been a fan of the look of the Mars Alpha pattern hull, for its extra detail and length. You can see below the difference between a normal GW Plastic hull and the Forgeworld one … its a Beast :)

When you add in the nicely detailed hull mounted front weapons … you get a good looking model! … note however no Heavy flamer .. guess who is going to have to make that!

With the Mars Alpha were the remaining weapons I needed to complete the set for the LRIWS sub-project. The normal looking Battle Cannon and a replacement Conqueror pattern (its actually an alternate battle cannon, but it looks really like a conqueror to me!). In addition I got a couple more turrets for my collection.

Also in the post was something I had been interested in from the states.

I had been wanting to add some panniers to my various vehicles so this tempted me also. I had seen some models with them on and thought I would give them a try!

Lastly and definitely not least … There is one single Steel Legion figure I did not have in my collection. The ultra rare Necromunda Sniper … who actually was a Steel Legion trooper kneeling. This figure is really rare and out of production, I have been scouring ebay for four years looking for him, when one came up in America a couple of weeks ago. I bid sniped like crazy to get him and I am ashamed to say paid what felt like a small fortune for a single figure (whoever sold him will be happy I am sure). But he is MINE NOW!!

There are few alternate heads/faces/alternate poses in the Steel Legion, I had them all but this one … Now I am very happy :)

I also got something else in the post … this one from the far east … but that bit will have to wait till I start that sub-project … next week I suspect!

Leman Russ Integrated Weapon System : LRIWS - Continued

Below you can see the collection of most of the variants

The demolisher for some unknown reason was cast as a solid part of the turret by forgeworld. As you can see at the bottom of the picture below I needed to cut the end of the turret off and work away at the resin till I had the cannon separated and tidied off. I need to build a small plasticard plate to sit on top of the gun when it is fitted to the modified Ryza turret.

In the same image you can see the Punisher Gun in place. I must say I was pleased with the look, I think it looked good with the different turret :)

Using the same gun mantlet component we can also fit the Plasma gun to the turret. This finally gave me the chance to comparison the Forgeworld Plasma gun with the GW one in the same turret.

I think I prefer the GW one to the Forgeworld turret, given its similarity to larger weapons on Titans and Super heavies. What do you think?

Lastly I cut down the FW conqueror gun and used it as the base of the GW Nova Cannon. I found the inside of the GW cannon had a 6mm diameter space which could take the appropriate sized plasticard tube. I drilled a similar size hole into the resin of the FW gun “base” and slid the tube into both parts. Once I checked fit and ensured everything lined up correctly I took the picture below. Looking closely at the picture, I think a plasticard collar should be fitted to the point where both items join, with rivets on it, to match the FW style.

All that now remains is to order a new Conqueror cannon and the forgotten normal Battle Cannon from Forgeworld.

Well that is my second project started. I have also done some work on the Macharius and will hopefully have some pictures to show progress for the weekend.

Leman Russ Integrated Weapon System : LRIWS for short.

I have always enjoyed modelling as much as I have done wargaming. As a modeller, my aim is to make a pleasing and often historically acurate model to the best of my abilitiy. The bit I enjoy about mixing that with wargaming is that you have multiple potential options with most vehicles. Like most “Magnet Boyz” I love magnetising my models and vehicles to enable them to have multiple tactical uses, different weapons, options etc. Well with so many potential variants of the Leman Russ, it becomes a bit of a challenging conundrum!

It breaks down into numerous subsets …

1. Sponsons or Not  - Weapons variants (Heavy Bolter, Heavy Flamer, Melta or Plasma)

3. Forward Mount Weapons variants (Heavy Bolter, Heavy Flamer, Las Cannon)

4. Pintle Mounted Weapon or Not - Weapons variants (Storm Bolter, Heavy Stubber)

4. Camo Netting or Not

5. Extra Armour or Not

6. Dozer Blade or Not

7. Hunter Killer Missile or Not

8. Turrent Mounted Weapon Variants (Battle Cannon, Exterminator Autocannon, Vanquisher Battle Cannon, Eradicator Nova Cannon, Demolisher Siege Cannon, Punisher Gatling Cannon, Executioner Plasma Cannon, Annihilator Las Cannons,  Conqueror Battle Cannon)

9. Named Crew (Knight Commander Pask & the Forgeworld named variants)

As you can see its quite interesting to try and to build a single Leman Russ which can accommodate all potential variants. But hey … why should it being hard stop us from doing it …

Initially we are going to tackle the Turret Mounted Weapon Ssystems as per LRIWS mentioned above. To make things slightly more complex I really REALLY like the Modified Ryza Pattern Turret from Forgeworld .. As seen in the picture below.

Well last time I was working on my Steel Legion I collected almost all the variant turrets from Forgeworld. But if you were following from before you know I sometimes throw money at my solutions!

I somehow strangely had not got the Battle Cannon variant (doh) … and obviously I needed a solution for the Eradicator Nova Cannon & Punisher Gatling Cannon (both came with the 2010 Leman Russ which I did not have).

Well after a trip down to my local GW (Croydon), I became the proud possessor of a brand new 2010 Leman Russ Box!  The Eradicator Nova Cannon would take a little bit of work, mainly obtaining the FW conqueror turret again and fitting the two together (the barrel size was closest of all those I checked). The Punisher however was going to take some work, it had a wide gun mantlet and a cunning fitting system to make it work. While I was also looking at the Punisher, I could not help but notice the Plasma cannon GW had included in the Demolisher Box. Wow, it was so much cooler than the Forgeworld variant, and best of all matched the look of the super heavy vehicles that FW did too.

So the problem then became one of making a gun mantlet that would enable me to mount a Plastic Plasma Cannon & Punisher Gatling Gun into the same turret. As the pieces were basically compatible with each other I needed to create some kind of cut down mantlet that fitted the same space as that used by Forgeworld on the modified Leman Russ turret, therefore giving me the weapon swap out capability I sought.

Here is my succesful attempt, yes there was a failed version (curse you Forgeworld) but more on that later.

First off I duplicated the original fitting in a scrap mould (a mixture of other small one or two off parts needing casting but not needing to be cast many times) which would be cut up into small pieces and used in other moulds as filler. I then cut the moulded gun mantlet down so that it was the width of the Modified Ryza pattern Leman Russ Turret. Then I proceeded to make a surround out of plasticard that looked similar to the ones made by FW. This is where the first variant bit the dust, if you take a careful look at the picture of the second attempt, you will see that the “back” is not square with the front (as shown by the greenstuff “shim/wedge”). The first attempt was perfectly square, naively assuming that forgeworld had made the gun hole “square”. Uh-huh … it wasn’t square on the first turret I checked, nor the fourth … Which is where I started checking the guns themselves, they were not “square” either. Hence the second version that matches the “irregular” fit of the gun hole :)

Once this was right I merely needed to test for fit and trim the plastic parts.

More in the following post .. The trials of the Demolisher Cannon, ordering yet more Forgeworld, did the Punisher work? …